ICM-D1 Series Servo Drive
ICM-D1 series drive can be configured via Ethernet industrial bus protocol with motion controller, featuring integrated rectifier, inverter, and braking unit, power coverage 0.4kW to 7.5kW.
Technical Parameters
Drive Model | ICM-D1S11S(-S) | ICM-D1S18S(-S) | ICM-D1S15-S | ICM-D1S30-S | ICM-D1S70(-S) |
|---|---|---|---|---|---|
Rated Operating Voltage | 220V@1Ph | 220V@1Ph | 380V@3Ph | 380V@3Ph | 380V@3Ph |
Input Voltage Tolerance | ±10% | ±10% | ±10% | ±10% | ±10% |
Bus Capacitor | 660uF | 940uF | 340uF | 500uF | 1000uF |
Control Power from Bus | No Extra Power Supply Needed | Two-Phase 380V | |||
Motor Drive Output | |||||
Axis Number | 1 | ||||
Continuous Output Current (RMS) | 2.8A | 5.5A | 5.4A | 11.9A | 25.7A |
Peak Output Current (RMS) | 10.1A | 16.9A | 14A | 29.7A | 64.2A |
Max Continuous Output Power | 0.4kW | 0.75kW | 1.5kW | 3.0kW | 7.5kW |
Switching Frequency | 8kHz | 5kHz | |||
Overload / Output Short-Circuit Protection | Yes | ||||
IO Input | |||||
IO Input Channels | 4 DI Inputs, Configurable as Enable, Registration, Home, OverTravel, etc. | ||||
Input Delay | Reg Signal ≤ 12us | ||||
HOME Signal ≤ 24ms, Enable Signal ≤ 6ms, OT Signal ≤ 6ms | |||||
Environmental Conditions | |||||
Mounting Type | Vertical Wall Mounting | ||||
Ambient Temperature | 0℃~+55℃ (Derate 10% per 5℃ above 45℃) | ||||
Ambient Humidity | 0%RH~90%RH (Non-Condensing) | ||||
Operating Altitude | Normal below 1000m, Derate 1000m-2000m | ||||
Protection Grade | IP20 (EN60529) | ||||
Storage Temperature | -20℃~70℃ (No Frost, No Condensation) | ||||
Mechanical Parameters | |||||
Dimensions (W×H×D) | 52x173x170mm | 52x173x170mm | 59x182x170mm | 81x192x170mm | 90x242x250mm |
Weight (Net) | 1.02kg | 1.02kg | 1.60kg | 1.80kg | 3.52kg |