ICM-LM Series Servo Motor
AC permanent magnet synchronous servo motor with high torque density, low cogging torque and high overload capability.
Technical Parameters
|
Attribute |
Value |
|---|---|
|
Operating Temperature |
0~40℃ |
|
Altitude |
0~1000m |
|
Storage Temperature |
-30℃~60℃ |
|
Storage Relative Humidity |
5%RH~90%RH (non-condensing) |
|
Storage Environment |
Non-corrosive |
|
[1]With optional shaft seal [2]IP rating with environmentally sealed cable connectors |
IP66-Dust tight, splash proof |
|
IP rating for motors without shaft seal and installed in the following directions |
|
|
Shaft down |
IP53-Dust tight, protection against powerful water jets |
|
Shaft horizontal |
IP51-Dust tight, protection against vertically falling drops |
|
Shaft up |
IP50-Dust tight, no water protection |
Note: [1]International Protection Code (IP66) is roughly equivalent to NEMA35 (dust tight, water tight).
[2]To achieve the specified IP rating for the motor, an optional shaft seal kit is required, and the system rating also depends on the IP rating of the cable.
(Only recommended models below, refer to the technical manual for other models)
|
Flange Size |
Motor Model |
Rated Power |
Rated Speed |
Rated Torque |
Peak Torque |
Rated Current |
Peak Current |
Torque Constant |
Rotor Inertia (×10⁻⁴ Kg·m²) |
Optional Components |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
kW |
RPM |
Nm |
Nm |
A |
A |
Nm/A |
Non-brake |
Brake |
|||
|
63 |
ICM-L0601-603 |
0.65 |
6000 |
1.04 |
4.02 |
1.61 |
6.6 |
0.65 |
0.25 |
0.30 |
Brake |
|
75 |
ICM-L0702-503 |
1.15 |
5000 |
2.19 |
7.1 |
2.66 |
9.2 |
0.82 |
0.33 |
0.51 |
Brake |
|
100 |
ICM-L1003-353 |
1.17 |
3500 |
3.2 |
9.6 |
3.0 |
10.4 |
1.08 |
0.74 |
0.85 |
Brake |
|
ICM-L1004-403 |
2.01 |
4000 |
4.8 |
14.4 |
4.9 |
17.2 |
0.98 |
1.04 |
1.15 |
Brake |
|
|
115 |
ICM-L1106-353 |
2.24 |
3500 |
6.1 |
24 |
5.1 |
20.4 |
1.21 |
3.49 |
3.75 |
Brake |
|
130 |
ICM-L1310-453 |
3.91 |
4500 |
8.3 |
32 |
8.0 |
32.2 |
1.03 |
4.61 |
5.06 |
Brake |
|
ICM-M1314-353 |
4.95 |
3500 |
13.5 |
48 |
10.8 |
39.1 |
1.26 |
23.3 |
23.7 |
Brake |
|
|
165 |
ICM-M1620-353 |
6.3 |
3500 |
17.1 |
50 |
15.2 |
48 |
1.12 |
45.5 |
47.1 |
Brake |
|
ICM-M1624-353 |
8.0 |
3500 |
21.7 |
62.5 |
18.9 |
59 |
1.15 |
60.6 |
62.3 |
Brake |
|
|
ICM-M1632-253 |
6.8 |
2500 |
26 |
100 |
14.2 |
59 |
1.84 |
80.9 |
82.5 |
Brake |
|
|
215 |
ICM-M2145-303 |
9.3 |
3000 |
29.5 |
135 |
20.4 |
96 |
1.44 |
175 |
182 |
Brake |
|
ICM-M2160-203 |
10.0 |
2000 |
47.9 |
180 |
22.3 |
86 |
2.14 |
235 |
241 |
Brake |
|
|
ICM-M2180-403-F |
24.8 |
4000 |
59.3 |
200 |
52.6 |
194 |
1.13 |
235 |
241 |
Brake |
|
|
300 |
ICM-L30A1-303-F |
28.9 |
3000 |
92 |
190 |
68.3 |
166 |
1.35 |
163 |
192 |
Brake |
|
ICM-L30A6-253-F |
38.2 |
2500 |
146 |
290 |
92.1 |
219 |
1.58 |
239 |
268 |
Brake |
|