ICM-D1C Series Servo Drive
Compact design based on ICM-D1, smaller size with optional braking resistor, power coverage 0.4kW-7.5kW.
Technical Parameters
Drive Model | ICM-D1CS11S | ICM-D1CS18S | ICM-D1CS15 | ICM-D1CS30 |
|---|---|---|---|---|
Rated Operating Voltage | 220V@1Ph | 220V@1Ph | 380V@3Ph | 380V@3Ph |
Input Voltage Tolerance | ±10% | ±10% | ±10% | ±10% |
Bus Capacitor | 660uF | 940uF | 340uF | 500uF |
Control Power Supply | Powered by DC bus, no external power supply required | |||
Motor Drive Output | ||||
Number of Axes | 1 | |||
Continuous Output Current (RMS) | 2.8A | 5.5A | 5.4A | 11.9A |
Peak Output Current (RMS) | 10.1A | 16.9A | 14A | 29.7A |
Max Continuous Output Power | 0.4kW | 0.75kW | 1.5kW | 3.0kW |
Switching Frequency | 8kHz | 5kHz | ||
Overload / Short-Circuit Protection | Yes | |||
IO Input | ||||
IO Input Channels | 4 DI signals, configurable as Enable, Registration, Home, OverTravel, etc. | |||
Input Delay | Reg signal ≤ 12us | |||
HOME signal ≤ 24ms, Enable signal ≤ 6ms, OT signal ≤ 6ms | ||||
Environmental Conditions | ||||
Mounting Type | Vertical wall mounting | |||
Ambient Temperature | 0℃~+55℃ (Derate 10% per 5℃ above 45℃) | |||
Ambient Humidity | 0%RH~90%RH (non-condensing) | |||
Operating Altitude | Normal operation below 1000m; derate from 1000m to 2000m | |||
Protection Class | IP20 (EN60529) | |||
Storage Temperature | -20℃~70℃ (no frost, no condensation) | |||
Mechanical Parameters | ||||
Dimensions (W×H×D) | 40x170x150mm | 50x170x150mm | 55x180x182mm | 81x180x182mm |
Weight (Net) | 0.64kg | 0.8kg | 1.1kg | 1.5kg |